Coupler and harness are stored in the light body!
harness storage type headlights!
5.75-inch headlight that can hold harnesses and couplers that are included in the headlights of many domestic motorcycles, including the SR400/500.
By making a 35mm hole in the 5.75-inch headlight body, which normally does not contain a coupler and can only pass three harnesses,
can accommodate a large number of couplers and harnesses, and the harness around the headlights and steering wheel will not be dango and will not stand out.
◎ A 35mm hole is drilled in the lower left corner of the light body that 2% ER, which has produced many custom cars, is particular about.
easy to put together with the main harness that is usually passed through the left side of the gas tank, does not rub against the head pipe, does not allow rain to enter in the side stand state, and headlight replacement is especially the best hole position that is not noticeable, <span style="font-size: 1rem;" > headlights specialized in the production of custom bikes.
2%ER is the same as the hole position to be drilled when building a custom vehicle.
■ with grommet to protect the harness
〇valve H4 60/55w (vehicle inspection is OK)
〇Wiring color Blue: High Beam White: Low Beam Green: Ground Yellow: Indicator
〇Size Outer diameter: about 157mm Length: about 140mm Mounting bolts: 3/8-UNC (about 10mm)
〇Contents Main body ×1
〇Main mounting Generic
We are unable to answer questions about how to install the harness on each car model or how to connect the harness.