convenient general-purpose turn signal stays
Our company's universal mounting stay for "A type turn signals" with ~M6 mounting.
Cutout that allows the harness to pass through allows you to conveniently attach and detach the turn signal.
the mounting side hole size is 5mm, so you can attach the turn signal to your preferred location.
"Star Bean Blinker" is OK for vehicle inspection.
(Please refer to the safety standards for > mounting position in the
[Material] Steel Thickness: 2.3mm Black zinc plated finish
[Contents] Stay x 2
SR400/500 front side, Attached to the fork boot stay hole on the stem side,
> It can meet the following safety standards and clear the vehicle inspection.
(You need to be careful about the mounting angle, but you can easily change the angle.)
□ The distance between the left and right sides of the inside of the front turn signal must be at least 240 mm
.
□ The distance between the left and right sides of the rear turn signal center is at least 15 mm
□ symmetrical to the center of the bike
□ must be no more than 2.3 m above the ground
□ visible from anywhere within the 20° inside direction and 80° outside the turn signal
◎ To each vendor
Your original turn signal stays
（MOQ 20～）
including materials, various surface treatments, dimensional changes such as hole core length, hole size, outer diameter, etc., bending, etc.
design, development, prototyping, and mass production.
For more information, please contact us via this email ⇒ 2percenterseller@gmail.com