convenient general-purpose turn signal stays
Universal mounting stay for " A-type turn signals" with ~M6 mounting.
Cutout that allows the harness to pass through allows you to conveniently attach and detach the turn signal.
The mounting side hole size is 6 mm (1/4 inch), so you can attach the turn signal to your preferred location.
"Star Bean Blinker" is OK for vehicle inspection.
(Please refer to the safety standards for > mounting position in the
[Material] Steel Thickness: 2.3mm Black zinc plated finish
[Contents] Stay x 2
□ The distance between the left and right sides of the inside of the front turn signal must be at least 240 mm
□ The distance between the left and right sides of the rear turn signal center is at least 15 mm
□ symmetrical to the center of the bike
□ must be no more than 2.3 m above the ground
□ visible from anywhere within the 20° inside direction and 80° outside the turn signal
◎ To each vendor
Your original turn signal stays（MOQ 20～）
including materials, various surface treatments, dimensional changes such as hole core length, hole size, outer diameter, etc., bending, etc.
design, development, prototyping, and mass production.
For more information >
2percenterseller@gmail.com
* Turn signals and bolts are not included.
* There is a possibility that there is a blur or unevenness peculiar to black zinc plating. As long as there is no problem with the function, it will not be subject to complaint.